How to install Floorify at a round wall?

Installing Floorify vinyl flooring at a round wall requires some extra attention and precision. Here are steps you can follow to achieve a neat and professional finish:

1. Preparation: Make sure the floor and room are clean, dry and level before you start the installation. Measure the space and plan your layout so you know how the shelves will fit around the round wall.

2. Create template: Make a paper template of the area around the round wall. You can do this by laying pieces of paper against the wall and using a pencil to trace the contours of the wall. Cut out the template and check that it fits exactly along the curve of the wall.

3. Transfer to the shelf: Place the template on the Floorify shelf where you want to make the cut. Make sure it is properly aligned and mark the cutting line clearly on the board.

Use suitable cutting tools, such as a sharp Stanley knife or a jigsaw with a fine blade, to cut along the marked line on the board.

4. Installation: Place the cut shelf in the correct position to check that it fits neatly against the round wall. Make minor adjustments if necessary. Continue laying the rest of the Floorify floor, making sure all planks are properly locked with the click system.

5. Finish: leave an appropriate expansion joint around the floor. With a round wall, this may mean leaving the space around the curve slightly larger than with straight walls.

By following these steps carefully, you can install Floorify vinyl flooring successfully and aesthetically, even around complex round walls. Always take accurate measurements and be careful when cutting to ensure the best result.